So you’ve turned your skate deck into a veritable work of art and you wanna hang it on your wall… how do you do this? Here’s my handy guide, starting with the cheapest and quickest method to the more professional approaches.
El cheapo – fishing line
The easiest and cheapest way to hang your deck is to simply thread a piece of fishing line through the holes, tie it with a granny knot and sling that baby up on the wall.
- Like I say, hella cheap and quick to do
- Pretty much invisible
- Looks as cheap as it is
- The line can start to rub against your artwork and chafe the paint
- The deck can rock in a breeze as the nose and tail sit against the wall.
This is a step up from the first option – buy yourself some drywall anchors/star plugs, screw eyes, and picture hanging wire from the hardware store and have your pliers ready. Drywall anchors are little plastic plugs that are used for drilling screws into walls, but in this case they’re going to fill out the hole in the deck so you can screw your eyelet into it.
You’ll need to find a drywall anchor that fits your board and still allows you to screw the eyelet in. I use a 25mm red one, but you might need to play around to find the right size. Trim the anchor to the approximate length (thickness of the wood) using pliers. Jam the round end of the anchor into the hole and use the pliers to force it in – you need a tight fit so that it stays in when the board is on the wall. Grab your eyelet of choice (I like a fairly small one) and screw it into the anchor. Check that everything is nice and firmly in place, then cut yourself a length of metal picture wire and attach it to each eyelet and tie it nice and tight. You’ll need to allow a bit of slack in the wire so that the board can hang – don’t make it too tight.
- It looks more pro than the first option and is more suitable for an art exhibition or other non-permanent display
- There’s a fair bit of shagging around and guess work in there
- You’ll have the same problem with the nose and the tail touching the wall, the board will be more likely to rock
- If you don’t achieve a tight enough fit the anchors can slip out of the holes.
Floating wall mount
Want one? Buy the product on Amazon here: Sk8ology Skateboard Display Kit (Tube) – No Drill Bit
The guys at Sk8ology sent me some of their products the other day to try out, and I was impressed! Essentially it’s an ingenious product that is drilled into the wall to hang your deck in a more pro and permanent way. Check out the video below to see how it works:
- It’s a totally permanent floating solution so the nose and tail aren’t touching on the wall which means they won’t move in a breeze or if they get knocked
- You also get the choice as to whether you want to lock the board on the wall so it can’t be lifted up, or be able to easily take it off when required
- It looks more professional and presents your decks as the serious pieces of art that they are.
- Costs a little bit more than the others at $9.99 for the deck display without the drill bit, but it’s hardly likely to break the bank now is it?
Check out www.sk8ology.com to find out more!
So there you have it, different strokes for different folks! If you’ve got a different method for hanging your board feel free to share it in the comments below.
This post contains an affiliate link to Amazon, meaning that if you buy any of the products mentioned above, at no cost to you, I get a small commission for the sale which helps me keep on making rad content!
The inaugural Gidgets Go Picasso Surfboard Art Workshop was held last Saturday at the Bondi Pavilion and despite the crappy weather it went off! I was so stoked with the response that we got from this, everyone was super lovely, and it was great to hear silence in the room as everyone was in deep creative concentration painting their surfboard artworks.
I led eight workshoppers through a four step cleaning process to prepare their boards for painting and demonstrated some of my favourite old-school spray techniques using Molotow spray paint and a handy palm frond and then let them loose on the supplies.
At the end of the day we ended up with nine completely different artworks, each one a unique expression of creativeness and ready to hit the waves.
The workshop was held in conjunction with Venus Goes Gidget and hosted by myself. Molotow Australia sponsored the paints and more workshops are in the pipeline for August 2015 – so sign up to my blog if you want to come along to the next one! Big thanks also to Matt Fieldes Photography for these lovely photos.
It’s all happening in camp Fieldey folks! In two and a half weeks I’m heading over to Sydney to run two special surfboard painting workshops in collaboration with Venus Goes Gidget. They’re both going to be held at the Amphitheatre garage at the Bondi Pavilion, so we’re right on the beach.
23rd Aug – All-girl workshop
This is a first time all-girl workshop, organised by the lovely Claudia from Venus Goes Gidget. Bring your board along and together we’ll prepare them for painting and I will divulge some awesome top secret retro spray techniques. No experience is necessary and your board will be ready to ride with it’s new sexy look.
Click here for more info and to sign up >>
24th Aug – Pimp your board!
Everyone from 12 – 102 is welcome at this workshop. Bring along your board and we’ll go through the process of preparing them for painting, then we have some fun with spray paint and learn easy retro spray paint techniques to make your stick look the sh!t. Of course we’ll also clear coat your artwork so you can take it out in the surf and rip in style!
Click here for more info and to sign up >>
Sydney surf, skate and mural commissions
While I’m in Sydney I’ll also be picking up some surfboard, skateboard and wall commissions, so if you have a surfboard, skateboard or wall that needs the Fieldey treatment please fill in the form here. If you’re needing some inspiration view the gallery of past commissions here.
Last month I was on location at The Apple in Bridgetown filming Episode 2 of my 3-part surfboard painting tutorials. I’m just winding up the film editing and thought I’d post a few screen caps from the clip – I think this one’s going to be a real corker!
Massive thank you to Matt Fieldes Photography for the pro filming, The Butcher Shop for the beautiful location, Star Surf and Skate for the surfboard and Molotow Australia for the excellent paint.
Enjoying the serenity with some dish washing detergent
Background is done and I’m waxing lyrical about the merits of paint markers
Demonstrating how to mix your own colours in an empty Molotow marker to paint in the shadows on the skull
Building up the layers of shadow on the skull by incrementally adding black to the custom colour marker
Switching the tip of the marker to a brush tip lets me do some really fine line work.
The fun part! Adding in the black on the moray eel
Thanks for reading – stay tuned for the full tutorial!
If you missed it – here’s Episode 1 starring Dan Duggan:
If you’ve ever wanted to give an old surfboard a new lease on life and a lick o’ paint, then you’ll be wanting to carefully prepare it for painting. Here’s a new tutorial from my Fieldey TV YouTube channel that will show you how to do just that!
If you want more information on painting your surfboard visit my handy blog post here: How to paint a surfboard ~ Fieldey style or ask a question in the comments below.
If you’re a regular YouTube why not stop by and suscribe to my channel?
There’s a new (YouTube) movie in town and it goes by the thrilling title: How to do an easy retro-style stencil for your skateboard.
It stars yours truly in my first starring and talking roll. It was a pretty scary thing to actually have my face and even worse, voice on show… I’d been purposely keeping it low key and keeping my secret identity hidden behind the name “Fieldey” which must have been pretty secret since some people assumed that I was a guy. So now the cat’s outta the bag and I’m now part of the internets.
I’m planning on doing a range of quick “How to” type movies on YouTube that will cover topics like how to prepare a surfboard to paint and how to do a cool stencil on your board. If you have any ideas or things you want to see covered by me in a slightly awkward manner please leave a comment below.
Filed under How To, Movie
As promised, here it is- the companion animal video to the How to paint a surfboard… Fieldey Style blog post, in which I paint a surfboard… Fieldey style!
Filed under How To, Movie